Will ship within one week. When tire pressure matters, truth is your answer. Accurate to within 0.2% and compensating for temperature, humidity, and elevation, it's anything but just another gauge.
• 100% Made in the USA
• Accuracy of 0.2% between 0 and 60 psi
• 0.5% at 100 psi
• 1% at 200 psi •
3D printed titanium body
• Aluminum purge valve
• Purge capacity of 0.1 psi per minute
• 9 V battery
• 1,200 hours of battery life
SILCA LIMITED WARRANTY
Parts covered by the SILCA Limited Warranty are considered subject to wear during normal use or are consumables subject to degradation during daily use. SILCA guarantees them to be free from manufacturing defects for 2 years.
Produced on demand and shipped within 5 days
Since Cancellara's victory at Paris-Roubaix in 2010, a few WorldTour mechanics have kept a secret. Josh's handcrafted, hyper-accurate tire gauges allow them to guarantee the most accurate and repeatable tire pressures for the world's most demanding events. These coveted gauges have been used in over 100 WorldTour victories, including five other Paris-Roubaix wins.
This gauge is known to all as “THE TRUTH” and SILCA is delighted to market it to everyone and not just a few WorldTour mechanics. Every TRUTH starts with a 100% American-made digital pressure gauge. These gauges compensate for temperature and humidity using only the finest medical grade 316L stainless steel wetted components and sensors for a lifetime of trouble-free use. The gauges utilize custom sensor calibration, where each gauge is calibrated with perfect accuracy to 30,000 psi, ensuring 0.2% accuracy between 0 and 60 psi with accuracy drifting 0.5% at 100 and 1% at 200 psi.
This adjustment of the sensor curve is unique among digital gauges, which all have slightly non-linear behavior on their full-scale reading. By calibrating at 30 psi instead of 0 psi, we are able to produce much higher accuracies at low pressures than traditional designs.
Each TRUTH is further equipped with a 3D printed 6AL/4V titanium body and a twist-style aluminum bleed valve capable of bleeding air as slowly as 0.1 psi per minute. 3D printing also allows the internal air passage to be only 0.5 mm in diameter for minimal air required to activate the pressure sensor. As a result, the TRUTH loses only 0.1 psi per reading in a 25mm tire at 100 psi, compared to up to 5 psi per reading in other designs.